Yaesu FT3Dr Instruction Manual page 40

y Registering a standard message
8 standard messages containing a maximum of 16 characters each can be registered in
this device.
The following characters can be entered in a standard message.
• Alphabet letter (half-byte upper case, half-byte lower case)
• Number (half-byte)
• Symbol
1
Press and hold the [DISP] key → Touch [APRS] → [7 APRS MSG TXT].
2
Turn the DIAL to select the message number to register
and press the [DISP] key.
A screen for editing the fixed text message will be displayed.
3
Entering a fixed text message.
Refer to "Text input screen" (FT3DR/DE Operating Manual) on how to enter a fixed
text message.
A maximum of up to 16 characters can be entered.
4
Press the [BACK] key.
The fixed text message will be registered.
5
Press the PTT.
To exit the set mode and return to the operating screen.
39