Setting The Symbol Of Your Own Station - Yaesu FT3Dr Instruction Manual

Setting the symbol of your own station

This sets the transmit symbol of your own station. The symbol can be selected from
among 48 types.
The default setting when shipped from the factory is "
1
Press and hold the [DISP] key → Touch [APRS] → [25 MY SYMBOL].
2
Turn the DIAL to select the symbol
The following four symbol types can be selected as your
own symbol: "ICON 1", "ICON 2", "ICON 3" and "ICON 4".
If "ICON 4" is selected, symbol characters can be input
directly when "25 MY SYMBOL (User)" appears. * See
the following page on how to enter the characters.
3
Press the [DISP] key
The cursor will move to the "Code" area of the table below. You can turn the DIAL to
select a frequently used symbol from the symbols shown in the table below).
Remark The default value of each symbol is as follows.
MY SYMBOL
1
2
3
4
4
Press the [DISP] key.
The symbol of your own station will be set.
5
Press the PTT.
To exit the set mode and return to the operating screen.
Code Symbol
[ /[ ]
Human
[ /b ]
Bicycle
[ /> ]
Car
[ YY ]
Yaesu Radio
", "
7
", " ", " ".
25 MY SYMBOL
ICON 1
[ /[ ]
Human/Person
PUSH"DISP"