Yaesu FT3Dr Instruction Manual page 62

FAST RATE: BEACON transmission time interval when speed increases above the
[HIGH SPD] setting.
TURN ANGL: Set the minimal value of changes in angle when the direction of movement
changes.
TURN SLOP: Set the coefficient for automatically altering the angle that judges changes
in the direction of movement according to speed.
The higher the coefficient value setting, the greater the judgment angle is
when moving at slow speeds.
1 to 255 (X10)°/SPEED
(If the real number for units of rotating tilt is set to 1/10, this is the same
as the unit setting used in HamHUD Nichetronix, LLC series transceivers.)
TURN TIME: Set the time limit until the next BEACON can be transmitted, after a
BEACON is transmitted upon detection of a change in time (Variable Rate
Beaconing) or direction (Corner Pegging).
Caution
If SmartBeaconing
TM
can be changed.
When changing parameters, be sure to adjust parameters of SmartBeaconing and DIGI PATH settings
for appropriate beacon transmission intervals to avoid communications channel congestion.
y 28 TIME ZONE
Set the time zone.
Setting Item: ± 13.0 hours
Default: UTC 0:00 hours
Explanation:
The time zone can be set in units of 30 minutes.
Time data from the GPS function is transmitted in Coordinated Universal Time (UTC).
The time difference from UTC varies depending on the country or region. When using
the transceiver in other countries or regions such as when traveling, modify the settings.
is to be operated at different timings, the parameters of settings TYPE1 to TYPE3
61