Yaesu FT3Dr Instruction Manual page 28

Select one of the following TYPEs.
OFF: Turn the SmartBeaconing function OFF
TYPE1: Recommended setting when moving at a high speed in a car etc.
TYPE2: Recommended setting when moving at a low speed such as a bicycle.
TYPE3: Recommended setting when walking at a low speed etc.
3
Press the PTT.
The selected TYPE is set, and the set mode is cancelled.
4
Touch [F MW] followed by [S.LIST].
The APRS STATION LIST screen will be displayed.
5
followed by [BEACON].
Touch
will be displayed at the top right of the display.
This is a short-cut to [APRS] → [16 BEACON TX] in the set mode.
SmartBeaconing is set when
Tips
• If the [APRS] → [16 BEACON TX] setting is set to SMART in the set mode, the setting of the
BEACON INTERVAL will be ignored.
• This function can be selected only when the status of [APRS] → [27 SmartBeaconing] in the set
mode is set to TYPE 1 - TYPE 3, and [APRS] → [24 MY POSITION] is set to GPS.
*SmartBeaconing™ is a function provided by HamHUD Nichetronix.
appears at the top right-hand corner of the display.
27
27 SmartBeaconing
STATUS : TYPE1
LOW SPD : 5km/h
HIGH SPD : 70km/h
SLOW RATE : 30min
FAST RATE : 120sec