Yaesu FT3Dr Instruction Manual page 56

INPUT: OFF: Deactivate the input function of the data terminal (negate function).
GPS: GPS data is obtained by connecting a commercially sold external GPS
device instead of the internal GPS function in this transceiver.
In this setting, information obtained from the internal GPS function is
negated.
Tip
OUTPUT: OFF:
GPS:
WAY.P: Output position information from APRS PACKET received from
WAYPOINT: Set the number of digits for CALLSIGN information of APRS BEACON
stations, attached to various data, when WAYPOINT is selected for
OUTPUT.
NMEA6: CALLSIGN is restricted to 6 digits to the right (example: if JQ1YBG-14
NMEA7: CALLSIGN is restricted to 7 digits to the right (example: if JQ1YBG-14
NMEA8: CALLSIGN is restricted to 8 digits to the right (example: if JQ1YBG-14
NMEA9: CALLSIGN is restricted to 9 digits to the right (example: if JQ1YBG-14
Mic-E: ON: Mic-E BEACON information (BEACON displayed as [E] on LIST) is
OFF: Mic-E BEACON information is not output when set to OFF.
POSIT: ON: POSITION BEACON information (BEACON displayed as [P] or [p] on
OFF: POSITION BEACON information is not output when set to OFF.
WEATHER: ON: WEATHER BEACON information (BEACON displayed as [W] or [w]
OFF: WEATHER BEACON information is not output when set to OFF.
Tip
OBJECT: ON: OBJECT BEACON information (BEACON displayed as [O] or [o] on
OFF: POSITION BEACON information is not output when set to OFF.
• If an external GPS device is connected to the data terminal, the time display on
the GPS screen appears as shown below.
aa (hour): bb (minute)
• The GPS function in this transceiver uses data in $GPRMC in NMEA-0183
format and $GPGGA data.
In order to use an external GPS device, the device must be able to output data
of this type.
• When using an external GPS device, setting the Set mode option [APRS] →
[20 GPS POWER] to OFF will deactivate the internal GPS function and reduce
battery consumption.
Deactivate the input function of the data terminal (negate function).
Output GPS data ($GPRMC in NMEA-0183 format or $GPGGA
data) obtained by this transceiver.
a BEACON received from another station as WAYPOINT data
($GPWPL in NMEA-0183 format).
is received, CALLSIGN information appears as [YBG-14]).
is received, CALLSIGN information appears as [1YBG-14]).
is received, CALLSIGN information appears as [Q1YBG-14]).
is received, CALLSIGN information appears as [JQ1YBG-14]).
output with WAPOINT data.
LIST) is output with WAPOINT data.
on LIST) is output with WAPOINT data.
Because a Positionless type WEATHER BEACON does not have position
information, it does not output WAYPOINT DATA.
LIST) is output with WAPOINT data.
55