Yaesu FT3Dr Instruction Manual page 9

y Entering a symbol character directly
You can enter a symbol character directly if the symbol that you want is not available.
1
Press and hold the [DISP] key → Touch [APRS] → [25 MY SYMBOL].
2
Turn the DIAL to select "ICON 4".
3
Press the [DISP] key
The cursor will move to the "Code" area.
Reference If "25 MY SYMBOL (User)" does not appear after pressing the [DISP] key, turn the DIAL
to select "25 MY SYMBOL (User).
4
Press the [DISP] key again
The cursor will move to the Symbol Table ID (character on the left side of the code).
5
Turn the DIAL to select the Symbol Table ID
6
Press the [DISP] key
The cursor will move to the Symbol Code (character on the right side of "Code").
7
Turn the DIAL to select the Symbol Code
8
Press the [DISP] key
The symbol will be set.
9
Press the PTT.
To exit the set mode and return to the operating screen.
Reference Please refer to "http://aprs.org/symbols/symbolsX.txt" and "http://aprs.org/symbols.html"
for the latest symbol table.
8