Roof Termination Cap Installation-With And Without Damper - Heat & Glo Foundation Series Installation And Operating Manual

H. ROOF TERMINATION CAP INSTALLATION - WITH AND WITHOUT OPTIONAL DAMPER
Roof Termination Without Optional
Mechanical Damper
Figure 8H.1
Roof Termination With Optional
Mechanical Damper
Figure 8H.2
26
Heat & Glo • FDN-4-ST, FDN-5-ST, FDN-6-ST, FDN-7-ST Installation Manual • 16400-9801 Rev. H • 11/19
POWERVENT
MOUNTING BRACKETS
OR DRILL MOUNTING
HOLES TO MATCH
BASE
INSULATION PAD MUST BE CUT IN
CENTER TO ACCOMMODATE VENT SIZE.
PLACE FOIL SIDE UP.
STEEL CHIMNEY ADAPTER
POWERVENT
MOUNTING BRACKETS
OR DRILL MOUNTING
HOLES TO MATCH BASE
INSULATION PAD MUST BE CUT IN
CENTER TO ACCOMMODATE VENT SIZE.
PLACE FOIL SIDE UP.
OPTIONALMECHANICAL
FLUE DAMPER
8 - VENTING