Table of Contents
Advertisement
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
8. Click the Apply button.
An Alert pop-up window opens.
9. Click the OK button.
All configuration settings are reset to their factory default values. All changes that you
made are erased, even if you saved the configuration.
Export a file from the switch
You can export configuration (ASCII) or log (ASCII log) files from the switch to a file server by
using TFTP or to a computer by using HTTP.
The following sections describe how you can export a file from the switch:
Use TFTP to export a file from the switch to a TFTP server on page 439
•
Use HTTP to export a file from the switch to a computer on page 441
•
Use TFTP to export a file from the switch to a TFTP server
You can upload (export) configuration (ASCII or log ASCII) files from the switch to a TFTP
server on the network.
To export a file from the switch to a TFTP server:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
4. Enter one of the following passwords:
•
After registration, enter the local device password.
By default, the local device password is password.
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
Maintain or Troubleshoot the Switch
Cloud Management
439
User Manual
Hide quick links:
Advertisement
Table of Contents
