NETGEAR GS108Tv3 User Manual page 246

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Routing> VLAN > VLAN Routing Configuration.
7. From the VLAN menu, select the VLAN.
This menu displays the IDs of all VLANs that are configured on the switch, that is, regular
VLANs and routing VLANs.
8. In the IP Address field, enter the IP address that to be assigned to the VLAN routing
interface.
9. In the Subnet Mask field, enter the subnet mask to be assigned to the VLAN routing
interface.
10. Do one of the following:
• New routing VLAN interface. If you configure a regular VLAN as a new VLAN
routing interface, click the Add button.
The VLAN routing interface is added for the selected VLAN ID. The entry in the MAC
Address field is automatically entered.
• Changed routing VLAN interface. If you change an existing routing VLAN interface,
click the Apply button.
You changes are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 52. VLAN Routing Configuration information
Field
Port
MAC Address
Routing Mode
Configure Routing
Cloud Management
Description
The interface that is assigned to the VLAN for routing.
The MAC address that is assigned to the VLAN routing interface.
Indicates whether routing is enabled for the VLAN routing Interface.
246 User Manual