Table of Contents
Advertisement
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select QoS > DiffServ > Advanced > Service Configuration.
7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above the table heading:
•
1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
•
LAG. Only LAGs are displayed.
•
All. Both physical interfaces and LAGs are displayed.
8. Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the port, or type
the port number in the Go To Interface field and click the Go button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
9. From the Policy In Name menu, select a policy name.
10. Click the Apply button.
Your settings are saved.
Configure Quality of Service
Cloud Management
292
User Manual
Hide quick links:
Advertisement
Table of Contents
