Configure The Cst Settings - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
The following table describes the nonconfigurable fields displayed on the page.
Table 33. STP Configuration status
Field
Global Settings
Configuration Digest Key
STP Status
Bridge Identifier
Time Since Topology Change
Topology Change Count
Topology Change
Designated Root
Root Path Cost
Root Port
Max Age (secs)
Forward Delay (secs)
Hold Time (secs)
CST Regional Root
CST Path Cost

Configure the CST settings

You can configure a common spanning tree (CST) and internal spanning tree on the switch.
To configure the CST settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
Configure Switching
Cloud Management
Description
The identifier used to identify the configuration currently being used.
The bridge identifier for the CST. It is made up using the bridge priority and
the base MAC address of the bridge.
The time in day-hour-minute-second format since the topology of the CST
last changed.
The number of times that the topology changed for the CST.
The value of the topology change setting for the switch that indicates if a
topology change is in progress on any port assigned to the CST. The option
is True or False.
The bridge identifier of the root bridge. It consists of the bridge priority and
the base MAC address of the bridge.
The path cost to the designated root for the CST.
The port to access the designated root for the CST.
The maximum age timer controls the maximum length of time in seconds
that passes before a bridge port saves its configuration BPDU information.
The derived value of the Root Port Bridge Forward Delay setting.
The minimum time in seconds between the transmission of configuration
BPDUs.
The priority and base MAC address of the CST regional root.
The path cost to the CST tree regional root.
180 User Manual