NETGEAR GS108Tv3 User Manual page 106

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
The System Information page displays.
6. Select System > SNMP > SNMP V1/V2 > Trap Configuration.
The Trap Configuration page displays.
7. Select the check box next to the recipient.
8. Change the fields as necessary.
9. Click the Apply button.
Your settings are saved.
Delete an SNMP trap recipient
To delete an SNMP trap recipient:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select System > SNMP > SNMP V1/V2 > Trap Configuration.
The Trap Configuration page displays.
7. Select the check box next to the recipient to remove.
8. Click the Delete button.
The trap recipient is removed.
Configure System Information
Cloud Management
106 User Manual