NETGEAR GS108Tv3 User Manual page 35

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
For information about finding the IP address of the switch, see Access the switch
on-network and connected to the Internet on page 19 or Access the switch off-network
on page 30.
The NETGEAR Business page displays.
4. If your browser does not open the NETGEAR Business page but displays a security
message and does not let you proceed, do one of the following:
• Google Chrome. If Google Chrome displays a Your connection is not private
message, click the ADVANCED link. Then, click the Proceed to x.x.x.x (unsafe) link,
in which x.x.x.x represents the IP address of the switch, and install a security
certificate.
• Apple Safari. If Apple Safari displays a This connection is not private message, click
the Show Details button. Then, click the visit this website link. If a warning pop-up
window opens, click the Visit Website button. If another pop-up window opens to let
you confirm changes to your certificate trust settings, enter your Mac user name and
password and click the Update Setting button.
• Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure message,
click the ADVANCED button. Then, click the Add Exception button. In the pop-up
window that opens, click the Confirm Security Exception button and install a
security certificate.
• Microsoft Internet Explorer. If Microsoft Internet Explorer displays a There is a
problem with this website's security certificate message, click the Continue to this
website (not recommended) link and install a security certificate.
• Microsoft Edge. If Microsoft Edge displays a There is a problem with this website's
security certificate message or a similar warning, select Details > Go on to the
webpage and install a security certificate.
5. Click the Login button, and follow the directions onscreen to register the switch with your
NETGEAR email address and password.
If you did not yet create a NETGEAR account, click the Create button, follow the directions
onscreen to create an account, and then register the switch with your NETGEAR email
address and password.
For information about the credentials, see Credentials for the local browser interface on
page 32.
The switch is registered.
6. Click the Login button.
The System Information page displays.
Tip: After you complete the previous procedure and the switch is
registered with NETGEAR, you can also use one of the following
methods to access the switch local browser interface:
- In the Smart Control Center, select the switch and click the Web
Browser Access button.
- In the Switch Discovery Tool, click the ADMIN PAGE button next to
your switch.
Get Started
Cloud Management
35 User Manual