Appendix B Specifications And Default Settings; Switch Default Settings - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Switch default settings

The following table describes the switch default settings.
Table 81. Switch default settings
Feature
IP address
Subnet mask
Default gateway
Protocol
Management VLAN ID
IPv6 admin mode
IPv6 address auto configuration
DHCPv6
Minimum length for the local device
password
SNTP client
Global logging
Memory logging
Persistent (flash) logging
DNS
SNMP Traps
Automatic saving to the startup
configuration
TACACS+
RADIUS
Denial of service protection
Dot1x authentication (IEEE 802.1X)
MAC-based port security
Access control lists (ACL)
Protected ports
Advertised port speed
Specifications and Default Settings
Cloud Management
Default
192.168.0.239
255.255.255.0
192.168.0.254
DHCP
1
Enabled
Disabled
Disabled
Eight characters
Enabled
Enabled
Enabled (Severity level: informational and above)
Disabled
Enabled (No servers configured)
Enabled
Enabled, but you must click the Apply button to save changes that
you make on a page.
No server configured
No server configured
Disabled
Disabled
All ports are unlocked
None configured
None
Maximum capacity
480 User Manual