Manage Routes And View The Routing Table; Manually Add A Route And View The Routing Table - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
If you select Enable, router advertisements are transmitted from the selected interface.
9. In the Advertise Address field, specify the IP address that must be advertised.
In the Maximum Advertise Interval field, enter the maximum time in seconds allowed
between router advertisements sent from the interface. The default value is 600.
10. In the Minimum Advertise Interval field, enter the minimum time in seconds allowed
between router advertisements sent from the interface.
The value must be in the range of 3 to 1800. The default value is 450.
11. In the Advertise Lifetime field, enter the value in seconds to be used as the lifetime field in
router advertisements sent from the interface.
This is the maximum length of time that the advertised addresses are to be considered as
valid router addresses by hosts. The default value is 1800.
12. In the Preference Level field, specify the preference level of the router as a default router
relative to other routers on the same subnet.
Higher numbered addresses are preferred. You must enter an integer. The default value
is 0.
13. Click the Apply button.
Your settings are saved.

Manage routes and view the routing table

The routing table collects routes from multiple sources: static routes and local routes. The
routing table can learn multiple routes to the same destination from multiple sources. The
routing table lists all routes.

Manually add a route and view the routing table

To manually add a default route or static route and view the routing table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
Configure Routing
Cloud Management
249 User Manual