NETGEAR GS108Tv3 User Manual page 204

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Switching> Multicast > IGMP Snooping > IGMP Snooping Table.
The IGMP Snooping Table page displays.
7. In the Search By MAC Address field, specify the MAC address whose MFDB table entry
you want to view.
Enter six two-digit hexadecimal numbers separated by colons, for example
00:01:23:43:45:67.
8. Click the Go button.
If the address exists, the entry is displayed. An exact match is required.
9. To refresh the page with the latest information about the switch, click the Update button.
10. To clear all multicast forwarding address entries that were created for IGMP snooping,
click the Clear button.
The following table describes the information in the IGMP snooping table.
Table 44. IGMP Snooping Table information
Field
MAC Address
VLAN ID
Type
Description
Interface
Configure Switching
Cloud Management
Description
The multicast MAC address for which the switch holds forwarding and/or filtering
information. The format is six two-digit hexadecimal numbers that are separated
by colons, for example, 01:00:5e:45:67:89.
The VLAN ID for which the switch holds forwarding and filtering information.
The type of the entry. Static entries are those that are configured by the end
user. Dynamic entries are added to the table as a result of a learning process or
protocol.
The text description of this multicast table entry. The options are Management
Configured, Network Configured, and Network Assisted.
The interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the
associated address.
204 User Manual