Deactivate An Access Profile - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
The following table describes the nonconfigurable data that is displayed.
Table 63. Access profile configuration profile summary
Field
Rule Type
Service Type
Source IP Address
Mask
Priority

Deactivate an access profile

You can deactivate an access profile.
To deactivate an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Security > Access > Access Control > Access Profile Configuration.
Manage Device Security
Cloud Management
Description
The action performed when the rules match.
The service type selected. The policy is restricted by the selected service type.
The source IP address of the client originating the management traffic.
The subnet mask of the IP Address.
The priority of the rule.
332 User Manual