SMC Networks Elite16 Manual page 73

Network O p e r a t i n g
Software Problems
If the problem is not found in the .
hardware, then check the software;
1, Make sure that you copied any re-
quired software drivers from the
driver diskette as instructed in the
documentation included with your
networking software,
2, If you are using Novell NetWare,
type the following at the DOS
prompt:
ipxi
This enables you to verify that -
• The driver you are using is ap-
propriate for the type of adapter
you have,
• The driver is the latest version,
(You can verify the version number
with your dealer)
If running ipx i does not uncover a
problem, contact your dealer for tech-
nical assistance.
If you are using a driver other than the
Novell driver, verify the software
driver settings match the actual Ether-
net adapter setting as specified in the
install.doc file provided with the -
driver-
ROM Device
Prior to troubleshooting an installed
ROM device, verify that the adapter,
cabling, and file server are woricing.
If you are still experiencing difficul-
ties, then check the ROM device,
1. If a ROM device is installed on the
adapter, verify that the ROM
device is correct for the computer
system and networic software you
are using. Make sure that every
pin on the ROM device is seated
firmly in the socket..
2, Verify the boot image files have
been installed properiy on the file
server as specified by the networic
operating system documentation,.
78