SMC Networks Elite16 Manual page 35

LAN Adapter Diagnostic Uer. 3.B1
Thursday August B. 1331 1B<1B aM
SET CONFIGURATION MENU 1
Board Type' 8813EUC
Netuork Address: B8
LAN Type' TP Ethernet
BB CB AS Cl ZB
Use t or 1 to select one of the folloulng.
Press Enter, and select the ualue for that paraneter.
Base I/O Address
IRQ Interrupt
RAM Size
RAM Base Address
ROM Size
ROM Base Address
Netuork Connection
EntBr=Options ESC^^Cancel
IBK
D4aBB
Disabled
CBBBB
IBBaseT or AUI
Fl=Help FlB=Conflgurotlon
Conplete
Figure 6. Set Configuration Menu
light that parameter and press [Enter].
A list of optional settings appears.
Use the arrow keys to highlight the set-
ting you require and press [Enter]. The
new setting is now displayed.
Notes:
1. The RAM Address you select here is
only for the purpose of this pro-
gram and has no effect on any
other network software used after-
ward.
2. The program will not stop a user
from making an invalid selection.
Some of the choices presented may
conflict with other installed devices.
Please refer to the "Configuration Con-
flicts" section to make sure that the
38