SMC Networks Elite16 Manual page 33

LAN Adapter Diagnostic Uer. 3.B1 Thursday August B. 1991 lBi4a an
MAIN MENU
Use t or.I to select one of the rollouing.
Then press Enter.
Then press Enter
Set Configuration
Basic Adapter Test
Initiate Test Messages
Respond to Test Messages
Exit to Operating SysteM
Enter=Select ESC^Cancel Fl=Help
Figure 5. Main Menu
one adapter board in the PC, then
the same 1/0 address may have
been assigned to both boards; To
fix this, tum off the P C and check
the 1/0 address on all boards.
Change the 1/0 addresses so that
each board has a unique value.
Restart the PC and ream the diag-
nostic program.
6. Use the arrow keys to highlight the
board you want to diagnose and
press [Enter], or simply type the list
number to the left of the board (for
instance, 1) to select that board.
The current board parameters appear
These items will be described later.
Press [Enter] to access the Main Menu
(Figure 5). If your adapter is configured
with different parameters, the option
36