SMC Networks Elite16 Manual page 79

an N-type coaxial connector Anixter
part number is 080870.
DB-15 AUI connector- Used at each
endof the AUI drop-cable. Anixter
part numbers are 081424 (female,
solder type), 080867 (slide lock),
081425 (male, solder type), 080868
(locking post).
No Connection
No Connection
DC Power Common
Data In A
Data In Shield
Data Out A
Control In A
Control In Shield
Figure A-1 shows the pin locations for
the male connector. The pin locations
for the female are the mirror image of
this, of the AUI connector has been
shorted to ground, a thermistor type
fuse will open the circuit and remove
the voltage from pin 13: It requires
approximately one hour from the time
the short circuit is removed for the
No Connection
Power Shield
DC Power +
Data In B
Data Out Shield
Data Out B
Control In B
Protective Ground
(Shell)
thermistor to restore the +12 volts to
pin 13.
Thick Ethemet cable (Ethemet tmnk
coaxial cable) - Solid tinned-copper
conductors, 2.5 meter tap-in maric-
ings, 50 ohm nominal impedance,
with N-type coaxial connectors. The
Beiden part numbers for cable only
are 9880 and 89880 (plenum rated).
Figure A-1. Mail AUI Ccmnector Pin Functions
84