SMC Networks Elite16 Manual page 32

LftN Adapter DlaHnostlo Uer. 3.B1 Thursdaw ftuqust B. 1991 IB'26 aw
BOARD SELECTION MENU
Use t or i to select a board to be diagnosed.
Then press Enter.
Enter=SelBct ESC=Cancel Fl=Help
Figure 4. Board Selection Menu
The "Choose a Board to Diagnose" op-
tion will be highlighted.
5. Press [Enter] to select this option.
The Board Selection Menu appears as
shown in Figure 4. A list of avail-
able adapters is displayed for your
selection.
If an error message appears, this indi-
cates that either an adapter board
is not present in the PC or is not
responding properly If two adapt-
er boards are installed in the same
machine, each board should be
. listed in the Board Selection menu
and must have a unique interrupt
and 1/0 address assigned to it.
If only one board is displayed, and
you're certain there is more than
35