SMC Networks Elite16 Manual page 51

5. Type the server name,
6. Type the IPX intemal network number
This number is usually the same as the
server address,
7. Insert the SYSTEM-2 diskette into
drive A:.
8. Type: A:INSTALL
9. Continue through the installation, fol-
lowing the prompts as indicated.
For additional help, refer to the
NetWare 386 User's Manual
and the 386.doc file.
If you want to install the program from
the hard disk, follow these instmctions.
1. Copy all files on all the relevant
SYSTEM diskettes to the hard disk
partitioned for NetWare 386.
Create an appropriate directory for the
files before copying.
2. Type: SERVER
3. Type the server name.
4. Type the IPX intemal network number
This number is usually the same as the
server address.
5. Insert the SYSTEM-2 diskette into
drive A:.
6. Type: A:INSTALL
7. Continue through the installation, fol-
lowing the prompts as indicated.
For additional help, refer to the Wef-
Ware 386 User's Manual and the
install.doc file on the SMC Super-
Disk.
To G e n e r a t e a Workstation
SheU f o r NetWare 3 8 6 V 3 . l l :
The instructions for installing NetWare
386 on a workstation is exactly the
same as the procedure for installing
NetWare 286 on a workstation. For in-
structions on this installation and con-
figuration, refer back to page 49 on "To
Generate a Workstation Shell for Net-
Ware 286 V2.2."
54