SMC Networks Elite16 Manual page 7

Ethemet Adapter Overview
This manual contains infonnation for
the following Ethernet adapter boards:
• Elite16(8013EPC)
• Elite16T(8013WC)
• Eliteie Combo (8013 EWC)
These Ethernet adapter boards are
designed for IBM PC, XT, AT, non-
Micro Channel PS/2, and compatible
computers. These products connect
to a local area network (LAN) using
either standard Ethemet cable or
lOBaseT unshielded twisted-pair wire
and telephone-type modular plugs.
In a network, the Ethemet adapter
will intemperate with most network
adapters that,comply with the IEEE
802.310Base2,10Base5, or lOBaseT
Ethernet standards.
In addition to this manual, the Ether-
net adapters come with a software
driver diskette. The diskette contains
drivers for most major network en-
vironments including Novell's Net-
Ware, LAN Manager, NetBIOS, and
others. Refer to the readme.doc file
on the diskette,for a complete listing
of the drivers, and for information on
installing the software driver
programs. Refer to the-LAN
Software Installation" section in this
guide for NetWare and LAN Manager
adapter installation information.
The software driver diskette also con-
tains a setup program for configuring
the adapter (if the preassigned jumper
settings cannot be used because of
conflicts with other boards installed
in your computer).
The "Network Interconnections" and
"Appendices" sections of this manual
contain information that is unique to
the individual adapters. The informa-
tion in all the other sections pertain to
all three Ethernet adapters unless
otherwise specified.
Ethemet Adapter
Features
Elite16 (See Figure 1)
• A single adapter provides thick and
thin Ethemet cable connections.
• One jumper selects the most
popular configurations.
• Software setup program also avail-
able for simple installation and
configuration.