Table of Contents
Advertisement
Exit to Operating System
keys to highlight the parameter you
want to change, then use the
[Spacebar] to change the setting.
Each time you depress the
[Spacebar], the value will change.
To change either the test pattern
and destination address field, type
in the value you require. When
you're finished, press [Esc] to
retum to the Respond Menu.
For a definition of each parameter
used during this procedure, press
[Fl ] at the appropriate screen and
a list of relevant definitions appear.
Select the Exit option when all diagnos-
tic procedures have been completed
and you want to return to DOS.
For more information on how to
operate the diagnostic program, refer
to the user.doc file located on the
software diskette.
42
Advertisement
Table of Contents
