Issue 2.0
5 - 78
5.2.7.2
Mount Multiline Terminal on Wall Plate using WM-L UNIT
1.
2.
3.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Locate the screw holes on the base and hang the
cover over the screws on the wall plate as illustrated
in
Figure 5-91 Attach WM-L UNIT to Wall
Figure 5-91 Attach WM-L UNIT to Wall Plate
Because of variation in wall plates, this method is not
recommended.
Plug one end of the line cord into the wall
receptacle. Leave about eight inches of cord and
bundle the rest.
Plug the opposite end of the line cord into the
multiline terminal as illustrated in
Plugging in Line
Cord.
Figure 5-92 Plugging in Line Cord
UNIVERGE SV8100
Plate.
Figure 5-92