NEC Univerge SV8100 System Hardware Manual page 533

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

System Hardware Manual

Charging the Headset Battery

To charge the headset battery, place it in the docking cradle. During

charging, the charge indicator is On. When charging is complete the

indicator goes Off. The headset must be charged for a minimum of

one hour before use – three hours to fully charge.

Initial Setup

The Unit includes a base ringer to provide notification of an incoming

call when not wearing your headset. This feature is enabled when

the Ringer switch is down and is disabled when the switch is up.

When the headset is installed, it sets itself as the default device in

your computer. You can set your preferences manually in Windows

through the Sounds and Audio Devices option in the control panel. A

softphone may require choosing the audio device and carries out a

short test to match this device to the softphone. It may also enable

you to choose which device indicates an incoming call. Refer to the

softphone documentation for more information.

Using the Headset

Refer to the User Guide for operating procedures.