Figure 4-8 Cd-Cp00-Us Battery Installation - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
4 - 20
3.1.2 Installation
Each SV8100 system must have the CD-CP00-US installed in Slot
1 of the Controlling Chassis.
The chassis power must be off when installing or removing

the CD-CP00-US.
After removing a previously installed CD-CP00-US,

handle the blade, carefully, from the edges. If certain
solder points/resistors are touched on the back of the
blade, some RAM/temporary memory may be lost (e.g.,
time, date, user-defined settings, etc.)
1. Install the battery on the CD-CP00-US. The polarity + symbol
must be on top as illustrated in
Battery
IMPORTANT INSTALLATION NOTES
Installation.

Figure 4-8 CD-CP00-US Battery Installation

UNIVERGE SV8100
Figure 4-8 CD-CP00-US
Installing the SV8100 Blades