Issue 2.0
9 - 86
15.
If using the handset, install the handset cable (refer to
9-67 Insert Handset
16.
Attach the analog trunk cable and the handset cable. Refer to
Figure 9-59 PSA-L UNIT Connections on page
17.
Install the legs, pushing upwards until both locks snap into
place.
18.
Return tilt leg to desired position.
19.
Place the multiline terminal numbered keypad up.
20.
Connect the Line cord, the PSTN cable and the Handset cord
(if used).
Cable).
Figure 9-67 Insert Handset Cable
Installing SV8100 Optional Equipment
UNIVERGE SV8100
Figure
9-81.