NEC Univerge SV8100 System Hardware Manual page 648

Issue 2.0
12.5
9 - 80
11. To determine the APR analog extension number
10-03-04 : Optional Installed Unit 1
Display the type of terminal installed. This can be used to verify
that the system recognizes the adapter.
10-03-06 : Terminal Type (B2)
Assign the terminal type (12) for the telephone channel, which
has the APR Adapter installed.
When you want the APR to use the same extension number as
the telephone to which it is attached, remove the terminal type
in this option. With this setup, when the analog device is in use,
it busies out the terminal as there is no separate port number
assigned for the adapter. To reverse this, and allow the APR to
have its own extension number, reassign the terminal type (12)
in this option.
10-03-07 : Logical Port Number (B2) Read Only
The port number of the APR Adapter is displayed for the
extension (APR ports = 193~512 with all software through
3.07). The ports are assigned from the highest available port
down.
PSA-L (BK) UNIT
/
The PSA-L UNIT (Power Save Adapter), an optional adapter for the ITL/DTL
Terminals, is used with IP telephones to make or receive a call using the
Public Switched Telephone Network (PSTN) when a call cannot be made or
received using the Local Area Network (LAN). When a power failure occurs,
the IP telephone is automatically switched to the PSTN. When power is
restored, the IP telephone restarts and connects to the network unless a
conversation is in progress on PSTN. The PSTN call must be completed by
going on-hook before the connection to the LAN is restored. The unit features:
 Survivability in case of power failure or network congestion
 Support on modular terminals (ITL/DTL)
PSTN Type = analog PSTN

 Dial method – MF/DF (10pps)
Before removing the adapter, to avoid any
hardware problems, unplug the line cord, then
any other adapter cables.
PSA-L (WH) UNIT
Installing SV8100 Optional Equipment
UNIVERGE SV8100