UNIVERGE SV8100
6.7
System Hardware Manual
Wall Mounting the Charging Unit
The charging unit can be wall mounted as well. Before mounting the charging
unit, consider the following:
Select a location away from electrical cables, pipes, or other items behind
the mounting location that could cause a hazard when inserting screws into
the wall.
Make sure the wall material can support the weight of the charging unit.
Use #10 screws with anchoring devices suitable for the wall material where
the charging unit will be placed.
To mount the charging unit:
1.
Insert two mounting screws as shown below. Allow about 3/16 of an
inch between the wall and screw heads for mounting the telephone.
Figure 6-49 Inserting Screws for Wall Mounting
2.
Plug the AC adapter in the charging unit. Wrap the AC adapter cord
around the strain relief.
Figure 6-50 Wrapping the AC Adapter Cord Around the Strain Relief
Issue 2.0
6 - 39