Issue 2.0
3 - 8
2.
Align the CD-CP00-US blade with the Slot 1 guides of the
Controlling Chassis.
Figure 3-3 19" Controlling Chassis – Guides Slot 1
3.
Slide the CD-CP00-US blade into the chassis until resistance
(back plane) is felt.
Figure 3-4 Installing the CD-CP00-US Blade
4.
Gently push until the blade seats. Tighten the two retaining
screws on front of the blade.
Figure 3-5 CD-CP00-US Blade Installed
UNIVERGE SV8100
Installing the SV8100 Chassis