UNIVERGE SV8100
System Hardware Manual
4.
Pull the cover toward you to remove.
Cover must be removed to install PZ-BS11 blade.
5.
Align the PZ-BS11 blade with the guides located
within the expansion bay.
Figure 3-15 PZ-BS11 Blade Guides
6.
Slide the PZ-BS11 blade into the chassis until
resistance (back plane) is felt.
Figure 3-16
7.
Gently push until the blade seats and install the
supplied retaining screw.
Installing PZ-BS11 Blade in
Expansion Chassis
Issue 2.0
3 - 15