NEC Univerge SV8100 System Hardware Manual page 212

Issue 2.0
3 - 76
Figure 3-88 Install Additional Brackets from CHS2U JOINT BRACKET KIT
4. Using supplied screws, secure the CHS2U STAND KIT to the
floor (refer to
CHS2U JOINT BRACKET
To prevent possible damage to the 19" chassis due to
falling, NEC recommends screws be installed in the
stand mount brackets as soon as possible.
5. Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-18
on grounding the system.
6. Refer to
3-20 to continue installation of the chassis or, Chapter 6
paragraph
for installation of blades.
Figure 3-88 Install Additional Brackets from
KIT).
3.3.5 Install AC Power Cords on 19" Chassis on page
2.1 Installation and Safety Precautions on page 4-4
UNIVERGE SV8100
Metal
Brackets
3.3.3 Install
for complete details
Installing the SV8100 Chassis