UNIVERGE SV8100
System Hardware Manual
Universal Slot for Legacy Line/Trunk blades and
Application blades (six slots). When used as
controlling chassis, the CD-CP00-US is mounted in
Figure 3-1 CHS2U-US Chassis (Front View)
Internal Battery Mount
Figure 3-2 CHS2U-US Chassis (Rear View)
3.3.1
Installing the 19" Controlling Chassis
1.
Ensure the chassis is powered down.
Slot 1 (shown).
Slot for PZ-BS10/PZ-BS11 blade
– Connection with CHS2U-US chassis
Power Switch
Fan Unit
(inside of cover)
Battery Connector
(inside of cover)
Do not remove or install this blade with the
power on.
Issue 2.0
AC Connector
Frame Ground
(FG) Terminal
3 - 7