UNIVERGE SV8100
System Hardware Manual
3.
With brackets snug against the 9.5" chassis, carefully slide the brackets
in opposite directions (refer to arrows
Installed), until they snap into place.
Figure 3-92 Stand Mount Brackets Installed
4.
Secure the 9.5" assembly to a flat surface with the four screws supplied
(refer to
Figure 3-93 Secure the 9.5" Stand Mounting with Screws on
page
3-80).
To prevent possible damage to the 9.5" chassis due to
falling, NEC recommends the screws be installed in
the stand mount brackets as soon as possible.
Figure 3-92 Stand Mount Brackets
Issue 2.0
3 - 79