Figure 3-142 19" Chassis Access Panel; Figure 3-143 Opening Chassis Access Panel (19" Chassis) - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
3 - 114
2. Install cabling into retention clips [refer to
Access Panel Removed (19" Chassis) on page
3. Insert access panel hinges into slots on rear of chassis.
4. Plug fan power cable into three prong plug [refer to
3-143 Opening Chassis Access Panel (19" Chassis) on page
3-113].
5. Reinstall access cover and secure with retaining screw (refer to
Figure 3-142 19" Chassis Access Panel on page
UNIVERGE SV8100
Figure 3-144 Chassis
3-113].
Figure
3-112).
Installing the SV8100 Chassis