UNIVERGE SV8100
System Hardware Manual
Figure 8-3 NEC SIP Conference Installation
2.
Connect the base unit to the Ethernet jack using the Ethernet cable.
3.
Connect the power cord to the base unit and plug it directly into an
electrical outlet.
4.
To connect additional units, connect the 12 foot Connection cable to the
Link Out jack on the first phone and to the Link In jack on the second
phone.
Up to three additional SIP Conference Max phones for a total of four may be
connected.
Figure 8-4 Install Additional NEC SIP Conference Units
Issue 2.0
8 - 9