Installation; Before You Begin; Adjusting Angle Of Tilt Leg; To Raise Tilt Leg - NEC DT820 Series User Manual

Ch 3 - Installation
I
NSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3.1
T o r a i se ti l t l eg
1
2
DT820 Phone User Guide
B E F O R E Y O U B E G I N
• Remove the phone from its packaging and inspect the phone for any damages.
• Verify that a station/account has been created for the user and phone.
• These steps only outline the setup of the equipment and physical connection of the
phone to the network. For information on configuring a phone for connection to the
network, contact your system administrator.
• Read through the installation procedures and assemble any equipment required to
install the phone (10 BASE-T/100 BASE-T/TX LAN cable, power adapter, tapered
rod, screwdrivers, etc.).
A D J U S T I N G A N G L E O F T I L T L E G
The angle of the tilt leg can be adjusted in two levels.

Tilt Levels

Second Level
First Level
Turn the phone upside down.
Pull out the leg stoppers.
3
3 -27