Advertisement
1.4 Optional Accessory
BA-E310
1.5 Cable Description
2. Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 3 screw
positions. Drill 3 holes on the surface and insert the supplied 3 Screw Anchors
into the screw holes. If you want to run the cable through the surface, drill a
hole within the 3 screw area.
2. To mount the camera to the surface, screw the Camera Base to the surface
using the supplied 3 Screws.
3. Connect the Power Cable to a 12VDC power source. Connect the Video
Output Cable to a monitor or DVR.
4. You can use the Joystick on the cable to configure camera OSD settings.
Remove the Protection Cap from the Joystick before using it.
Color / Material: White / Metal
Size (Φ x H): 101 x 52mm / 3.98"x 2"
Weight: 540g / 1.2lb
12VDC
Video Output Cable (BNC, 75Ohm)
Screws
Power Cable
Camera Base
Screw Anchors
2
Mounting
Surface
Advertisement
