4.2 Dome
4.2.1 COMM
MAIN MENU
< SYSTEM >
< DOME >
< CAMERA >
< DISPLAY >
< LANGUAGE >
< TIMING TASK >
< ALARM >
< RESET >
EXIT
DEVICE ID: The device ID is auto generated by the system.
CHECK ID: To change the TARGET ID, please input the CHECK ID exactly same as the DEVICE ID displays on
the screen.
TARGET ID: Target ID is available from 001 to 250, which can be used to distinguish several domes with
the same ID.
SOFT PROTOCOL: Select a protocol for the dome.
BAUD RATE: Select a baud rate for the dome. Options include 1200BPS, 2400BPS, 4800BPS and 9600BPS.
COMM RESET: Enter to restore the COMM settings to factory default and then automatically restart the
dome.
SAVE: Enter to save all the configurations. The dome will reboot.
EXIT: Exit the current menu.
4.2.2 IR DISPLAY
MAIN MENU
< SYSTEM >
< DOME >
< CAMERA >
< DISPLAY >
< LANGUAGE >
< TIMING TASK >
< ALARM >
< RESET >
EXIT
WORKING MODE: Select an IR working mode for Day/Night switch. Options include Auto, Off (color) and
On (black & white). If Auto is selected, the dome will automatically switch from day to night mode when
the illumination level is low; or automatically switch from night to day mode when the illumination level
is high.
DOME
< COMM >
< IR DISPLAY >
< GUARD TOURS >
< A-B SCAN >
< PAN SCAN >
< PATTERN >
< PARK ACTION >
< PRIVACY ZONE >
< ADVANCED >
DOME
< COMM >
< IR DISPLAY >
< GUARD TOURS >
< A-B SCAN >
< PAN SCAN >
< PATTERN >
< PARK ACTION >
< PRIVACY ZONE >
< ADVANCED >
11
EPA6220 / EPA6236
COMM
DEVICE ID
CHECK ID
TARGET ID
SOFT PROTOCOL
BAUD RATE
COMM RESET
SAVE
EXIT
IR DISPLAY
WORKING MODE
TESTING TIME
OUTPUT POWER
ILLUMINATION ON
AMBIENT LIGHT
IR SWITCH ZOOM
EXIT
160303
160298
003
AUTO
9600
AUTO
08S
100
03
17
07