®
ABB i-bus
EIB / KNX
3.4.4.2
Edit switching time
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Fig. 81:
Dialog window: "Edit switching time"
To edit a switching time, first select Time switch program, Day routines in the
selection area followed by a specific day routine e.g. 7:55.
The associated table is activated in the right-hand window and the already
inserted switching times are visible.
The table is divided into Time, GA No., GA Name, Value, Type and SoC.
The meaning of the individual columns is as follows:
Time
This column displays the set switching time at which a telegram is sent.
GA No.
The number of the group address is the unique identifier of a group address.
GA Name
The name of the group address is displayed here.
Value
This column displays which value is sent with the group address.
73