Time Switch Program - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
3.4.2

Time switch program

© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Fig. 44: "Time switch program" screen
Method of operation
The time switch program sends telegrams with specific group addresses and
values at the parameterised times. Specific functions are thus triggered in
®
the ABB i-bus installation such as switching the lighting in a room on or off.
To do so, day routines i.e. switching programs for specific days can be
defined. A week routine with the assignment of day routines to weekdays
can also be set.
In the time switch program, you can
- define 15 day routines i.e. 15 different time switch programs for the period
between 00:00 and 23:59,
- assign a total of 800 switching times,
- define the week routine i.e. assign a day routine to each day of the week,
- define daylight saving times for 10 years in advance,
- assign 100 individual periods – so-called special days – which deviate
from the normal week routine and
- display an overview of the time switch program.
44