Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
3.3.7.1
Set date/time
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
When selecting the menu item Set date/time..., the date and time of the
internal clock are read from the Application Unit Time or set.
The prerequisite is that the physical address and the application program of
the Application Unit Time ABZ/S 2.1 must have been loaded beforehand.
After selecting the menu item Set date/time..., the associated dialog window
opens.
Fig. 16:
Parameter window: "Online menu, Set date/time"
Date
Options:
Enter date
The date can be set in a range between 1.1.2000 and 31.12. 2035. It is
displayed as numbers which are separated by full stops in the sequence
day.month.year. On the right-hand side of the input field for the date, there is a
button which is used to display the relevant calendar for the current date.
Note:
When opening the dialog field, the current date of the PC is
automatically read and displayed.
Time
Options:
Enter time
The time is shown in hours, minutes and seconds. The displays for hours,
minutes and seconds can be edited separately via the Left arrow and Right
arrow buttons.
Note:
When opening the dialog field, the current time of the PC is
automatically read and displayed.
24
Advertisement
Table of Contents
