®
ABB i-bus
EIB / KNX
3.4.7.1
Insert new special day
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Note:
Before a new special day is inserted, a day routine must have
been created under Day routines.
Fig. 118:
Dialog window: "Insert new special day"
To insert a special day, first select Time switch program in the selection area
followed by Special days.
The associated table is activated in the right-hand window.
The table is divided into Start, End and Day routine.
The meaning of the individual columns is as follows:
Start
The start of the special day is displayed in this column.
End
The end of the special day is displayed in this column.
Day routine
This column displays the day routine.
110