ABB i-bus EIB Product Manual page 176

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
The dialog window Trigger for group 01: Beginning of instruction is activated
in the following way:
- by double-clicking on *** new group trigger *** or
- by pressing the right mouse button and selecting New group trigger in the
pop-up menu or
- by selecting Edit in the menu bar and then activating New group trigger in
the pop-up menu.
Fig. 162: Parameter window: "Trigger for group 01: Beginning of instruction, Insert group address"
Group address
Options: new group address
The parameter is divided into Type, Name and No. The table can be
arranged and sorted as required.
The meaning of the individual columns is as follows:
Type
The type indicates which type of values a telegram with this group address
can send.
Name
The name of the group address is defined during the parameterisation of the
®
ABB i-bus installation and cannot be modified with the parameterisation
software PZM2.
No.
The number of the group address is the unique identifier of a group address.
176