Delete Group Address - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX

3.4.12.3 Delete group address

© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Fig. 221: Dialog window: "Delete group address"
Note: The deletion of group addresses is only possible in ETS3.
The deletion process described here refers to the used and
unused group addresses in the application program.
If the group addresses in the dialog are deleted, they remain
available.
To delete a group address, select Group addresses in the selection area.
The associated table is activated in the right-hand window.
The table is divided into GA No., GA Name, Type, DR, ST, GT and GM.
The meaning of the individual columns is as follows:
GA No.
The number of the group address is the unique identifier of a group address.
GA Name
The name of the group address is displayed here.
Type
The type indicates which type of values a telegram with this group address
can send.
DR
A + in the Day routine column (DR) indicates whether a telegram with this
group address can activate or deactivate a day routine.
229