ABB i-bus EIB Product Manual page 11

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Device technology
Supplied state
The Application Unit Time is supplied with the physical address 15.15.255.
The application program is pre-loaded. During the commissioning stage,
only group addresses and parameters need to be loaded. If required, the
complete application program can be reloaded. When changing the
application program or after unloading, a longer download process may
occur.
Download behaviour
Due to the complexity of the device, it can take up to 1.5 min. during a
download until the progress bar appears, depending on the computer being
used.
Assignment of the physical address
The assignment and programming of the physical address, group address
and parameters is carried out in ETS.
Cleaning
Dirty devices can be cleaned with a dry cloth. If this is not sufficient, a cloth
that has been moistened with soap may be used. Corrosive cleaning agents
or solvents may not be used in any event.
Maintenance
The device is maintenance-free. In the event of damage (e.g. during
transportation, storage), repairs may not be carried out by a third party. The
right to claim under guarantee expires when the device is opened.
11