ABB i-bus EIB Product Manual page 38

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
If the option Slave (always receive), Slave disable time (00:05 ... 23:55
receive), Master (send every minute), Master (send hourly) or Master (send
daily) is selected, the following parameters are visible.
Fig. 36: Parameter window: "General, Operating mode of clock, Slave (always receive)"
Group address for time / date / request
Options: none /
new group address
If slave or master is selected as the operating mode, the group addresses
for the time and date and for requesting the time and date appear – if group
addresses have already been assigned in ETS3.
If no group addresses have yet been assigned in ETS3 or no new group
addresses have yet been created, the options are preset with none.
38