ABB i-bus EIB Product Manual page 182

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
After selecting the option new group address, the associated dialog window
Add group addresses is activated.
Fig. 171: Dialog window: "Group trigger, Select group address"
New group addresses can be created by dragging & dropping main groups,
middle groups and subgroups.
The Accept button is activated by clicking on the new group address in the
right-hand window.
The new group address is adopted in the following way:
- by double-clicking on the active group address or
- by pressing the right mouse button and selecting Accept in the pop-up
menu or
- by pressing the Accept button.
The dialog window is closed after pressing the Accept button.
Note: The transfer of the newly created group address to ETS3 is only
carried out after exiting the ABZ/S parameterisation and after
confirming the prompt that the modified data should be saved.
The editing of the group addresses such as modification of the
description or deletion can only be carried out in ETS3.
182